Dragon””s Breath



Amount Wanted Print Recipe


SELECT TO ADD TO CART

80%

AMT:

10%

AMT:

10%

AMT:


Total:
Suitable Substitute

Summary

Water = Gasoline Petroleum Jelly = Diesel Naptha = Methanol

 

Paul”s Dragons Breath Formula : Gasoline, Diesel, Methanol are the CORRECT liquids used. 80/10/10 for a total of 2.5 gallons in a 6″ mortar. I also add a cup or two of water to cover the egg. This is my attempt to make the remaining liquid in the tube after firing it eco-friendly. (You can figure the division / multiplication for other size tubes). The reason I do not use more diesel is that diesel will not burn completely before it hits the ground. I have tested this extensively. *If you try more diesel, be prepared for diesel & burning diesel on the ground around the tube. Lift: 40 grams of EACH 2F and 4F … Totaling 80 grams. I use a cheap baggie with an e-match coming out. Electrical tape the snot out of it so you cant see the baggie at all. Then dip it in ** ” BONDO FIBERGLASS RESIN ” ** Any other brand will take 2-3 times longer to set. (I call it an egg when completed). Inspect the finished product for holes / pin holes before use. *Always have a few spare dragon eggs. In case of a failure, you can pull the failed egg out and fire the tube to dispose of the liquid… http://www.youtube.com/watch?v=QkRMmowEJO8

Author: Paul Biersach

Source: http://www.passfire.com/